CorroLogic® Slurry

Product Description

CorroLogic® Slurry is a water-based rust preventive concentrate for water blasting, wet abrasive blasting, hydrotesting, fire sprinkler water systems, or preservation. It contains contact and Vapor phase Corrosion Inhibitors (VpCI®), capable of protecting uncoated surfaces.

CorroLogic® Slurry is non-toxic, environmentally friendly, and contains no nitrite or phosphate inhibitors. CorroLogic® Slurry is safe, economical to use, and easy to dispose of. Welding after application will not cause toxic fumes during welding.

The VpCI® treatment can be removed from the metal surface with water or any conventional washing procedure. In most cases, CorroLogic® Slurry need not be removed prior to painting or coating.

Features

• Non-flammable  
• Non-toxic, nitrite, and phosphate-free  
• Environmentally friendly  
• Biodegradable  
• Weldable  
• Can be painted over  
• Suitable for salt water applications

Typical Applications

• Wet abrasive blasting  
• Water blasting 
• Hydrotesting  
• Preservation of sandblasted surfaces  
• Ballast tank preservation

Method of Application

Mix CorroLogic® Slurry lightly, by hand or motorized blade, to a uniform consistency before use.

For wet abrasive blasting and water blasting, add CorroLogic® Slurry concentrate directly to the blasting media. After blasting allow the freshly blasted surface to dry.

For hydrotesting, add CorroLogic® Slurry concentrate directly to the hydrotest water. Either leave the solution in or drain it out.

For preservation of sandblasted surfaces, add CorroLogic® Slurry to water and spray the freshly cleaned surfaces with the solution.

Metals Protected

• Carbon steel
• Mild steel
• Stainless steel
• Aluminum
• Other ferrous metals

Packaging and Storage

CorroLogic® Slurry is available in 5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes, and bulk. Store CorroLogic® Slurry in a heated warehouse to avoid freezing. Under these conditions, shelf life is 24 months

Dilution Range

Dilute CorroLogic® Slurry at a ratio of 1:10 to 1:40 with potable water by volume for fresh water applications.

Dilute CorroLogic® Slurry at a ratio of 1:4 for salt water applications.

Limitations

CorroLogic® Slurry is not suitable for yellow metals (i.e. copper, brass).