ElectriCorr® VpCI®-239 Extreme Environment/Outdoor Cleaner

Product Description

ElecriCorr® VpCI®-239 is a multifunctional outdoor cleaner/corrosion protector. It removes oils, grime, wax, and other contaminates with ease, and provides corrosion protection to the treated surface at the same time. ElecriCorr® VpCI®-239 forms a very thin film against aggressive conditions including industrial, marine, and tropical regions. The vapor phase inhibitors continuously sublimate to protect difficult-to- access areas. ElecriCorr® VpCI®-239 can be safely used with most plastics, elastomers, and other non-metallics. Parts and equipment treated with ElecriCorr® VpCI®-239 and packaged properly afterwards are ready to be deployed at moments notice.

ElecriCorr® VpCI®-239 is free of CFCs and 1,1,1-Trichlorethane. Provides instant corrosion protection.

UFI: 3A20-H08X-K003-H2KY

Packaging and Storage

ElectriCorr® VpCI®-239 is available in 9.45 oz. (267.75 grams) aerosol spray (6 cans per carton), 5 gallon (19 L) pails, 55 gallon (208 L) drums, liquid totes, and bulk

To ensure best product performance, store in original packaging, indoors, and out of direct sunlight at 40-100 °F (4-38 °C).

Shelf life: 3 years

Features

• Excellent outdoor protection  
• Can be applied indoors  
• Fast-drying, nonsticky corrosion inhibiting film  
• Effective cleaner for grime, oil, wax, and other contaminates  
• Instant corrosion protection to ferrous and non-ferrous metals  
• Minimized field service  
• Increased corrosion protection at a lower cost than conventional rust preventives 
• CFC and 1,1,1-Trichlorethane free 
• Vapor phase protection in difficult to reach areas  
• Moisture-displacing and penetrating film characteristics

Typical Applications

• Preservation of cleaned surfaces, parts, and equipment  
• De-watering after aqueous cleaning  
• Protection between processing steps  
• Preservation of pumps  
• Preservation of electric motors  
• Can be used in contact with engineering plastics, elastomers, and other non-metallics  
• Outdoor generators and junction boxes  
• Outdoor and indoor electrical outlets

Application

Spray a very light mist over the area needing protection. Dry time is approximately 1-2 hours at 70 °F (21 °C)and 50% relative humidity.

Note: Application of a heavy mist will result in a heavy film that sags and remains wet.